Ski Parts & Accessories

Features of the Transpack Goggle Cover Lightweight convenient padded goggle cover Neoprene and stretch fabric construction Easy-fit elastic opening Conveniently fits into pocket.

HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. - HS10 can also be used as a race wax, preferably used with a top coat. - 0°C/+10°C - Recommended iron temp: 120°C (248°F).

The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has a good durability and offers great performance on natural and artificial snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 145°C (293°F). - -6°C to -12°C (21°F to 10°F).

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 140°C (284°F). - -2°C to -8°C (28°F to 18°F).

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. - Recommended iron temp: 130°C (266°F). - -4°C to +4°C (25°F to 39°F).

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. - Recommended iron temp: 120°C (248°F). - Replaces the CH10X. - 0°C to +10°C (32°F to 50°F).

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. PS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. PS6 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Universal All Temperature. Protects integrated skins from icing and improves glide properties. Recommended maintenance for skin skis to extend their life span and get a better ski experience. To be applied before skiing. Pumpspray. Includes Fiberlene. - 70 ml/2.37 US fl. oz. - 10 pcs.

SWIX Skin Cleaner is developed to clean integrated skins in a gentle way, without affecting the skin glue. Over time skins pick up wax leftovers, dirt and pollution from the snow, which will make the skin both slower and less effective. By using the Swix Skin Cleaner you will help restore the properties of the skin and increase its efficiency. To be used after skiing: Spray cleaner on paper and clean the skin in a tip-to-tail direction. - 70 ml/2.37 US fl. oz. - 10 pcs

The most popular V-wax. A very flexible and versatile wax covering a large temperature- range on the cold side of freezing. To be utilized close to 0°C, demands relatively new snow and low air humidity (below 45-50%).

New fallen snow 0°C to +1°C (32°F to 34°F). Old fine grained snow 0°C to -2°C (32°F to 28°F). For moist new snow up to +1°C (34°F) and down to -2°C (28°F) in older more transformed granular snow. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

Cold feet and frozen toes got you down? You need the Hotronic FootWarmer S4+ Custom Boot Heater in your life. It's easy to install on any insole and comes complete with four distinct temperature settings to keep your piglets as cozy as can be. The "Custom" model does not come with insoles. Intended for installation on custom insoles you already own. Powerful Longevity – S-Series NiMH batteries maintain up to 55% of a full charge and 95% of their initial capacity after four years of non-use. An increase in capacity offers up to 30% higher temperature and longer duration on a single full charge when needed most - in the cold. 4 Distinct Temperature Settings – The S4 offers three base level settings for comfort and warmth maintenance, with a fourth setting for a blast of extra heat when needed. Compatibility – For use in Hotronic‘s Heat Ready Insoles, custom insoles, orthotics, or insoles of one‘s own choice. Simple Installation With Household Tools Attaches to the Power Straps of Ski Boots

The Hotronic Footwarmer S3 Custom offers more than ever before; including enhanced reliability, longevity, and performance. The S3 Custom batteries maintain up to 55% of a full charge and 95% of their initial capacity after four years of non-use. Plus, an increase in capacity offers up to a combined 30% in higher average temperatures and longer durations on a single full charge, when needed most, in the cold! Hotronic’s Power Plus S3 Custom FootWarmer offers a compact, powerful battery pack with three batteries in each pack. Features: - Powered by high capacity batteries developed for cold temperature operation - Advanced charging technology with overcharge protection - Four temperature duration settings

Securing the battery packs for your Hotronic boot heaters is quick and easy with the Hotronic Mounting Brackets. Simply drill a single hole in your boot's shell, screw on the brackets and voilà!

A quick and easy solution for mounting Hotronic battery packs, the Hotronic Strap Brackets fix to the power straps of your ski boots so you can continue to operate the closure mechanism on your boots without hassle.

Comfortable Heat Socks with large heated areas, intelligent heat level control, and gentle compression. The BOOTDOC Surround Heat Socks have a large integrated heating element and an anatomic design in the toe area. When developing these socks, particular attention was paid to the heat distribution in the big toe area. The Surround Heat Technology means that the toes are pleasantly warmed on both the top and bottom of the foot. The yarns used for the socks have extremely fi ne fi bers, which ensures an optimal foot climate. They are also breathable and regulate moisture. Particular care was paid to the fi t and ensuring the highest possible level of comfort for the consumer. Compression and a wrinkle-free fi t, as well as intelligent cable placement, means pressure points are avoided. Surround Heat Enlarged heating area Asymmetrical shin and instep protectors ensure greater comfort The battery packs are attached to the inner cuff s of the socks using snap fasteners Four levels of heating power are available and are set on the battery pack itself, including a Power Boost setting for a short boost of extra heat (approx. 3 minutes) Reinforced in the toe and heel areas Two-layer cuff design for additional protection and support for the battery pack Machine washable up to 30 °C (in the mesh bag provided) Heating element „Surround“ in the outer layer for more comfort Shin and instep protection Material: 80 % nylon, 20 % spandex, machine washable at temperatures up to 30 °C

Fact: Your feet are going to be spending a lot of idle time on the lifts and at the base. Sometimes even the heaviest wool and synthetic can't keep those toes warm. Prepare for those times with the Hotronic® Heat Socks XLP One Set. The wool-blend sock includes a low-profile electric heating system to keep toes warm and limber. You can adjust the heat as needed through three primary settings and an extra-powerful Boost mode. The battery pack sits inside the double cuff of the power-fit sock, and the heating element runs through the sock itself. The powerful rechargeable One battery provides up to 13.5 hours of use, covering you from first chair through après. And it's not only good for skiing, either; use it for cycling, skating, fishing and other activities in which your feet regularly get cold and numb.