Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Fenders

$22.99
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

$36.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.

$39.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.

$87.99
Enjoy cycling in any weather. The Bluemels 75 U fenders cover tire widths up to 65mm. They use a proprietary construction with super-fine aluminum strips embedded in a matte black plastic coating, making these mudguards extremely durable and resistant to bending and UV damage.
- Very wide profile for tires up to 65mm width
- Proprietary construction embeds super-fine aluminum strips into matte black plastic coating
- For 27.5 and 29-inch wheels
- Includes accessory parts and stays
- Weight: 800g

$68.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

$9.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

$59.99
$68.99
13% Off
End wet feet forever! SKS Longboard are one of the longest and best coverage fenders on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety.
- 26 x 2.1–2.35

$51.99
S-BOARD
This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included.
S-BLADE
The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted.
- Weight: 206g
- Wheel size: 650B – 28-inch
- Tire width: 30 – 38mm
- Length front fender: 390mm
- Length rear fender: 465mm

$54.99
Turn your big-wheeled bike into an all-weather vehicle with the Cascadia 29er Fenders. Made of unbreakable polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$54.99 - $59.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$24.99
$30.99
19% Off
The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack.
- Durable all-weather polypropylene blade
- Quick release seatpost mount attaches and removes in a snap
- Features fender angle adjustability to fit most bikes and dial in spray protection
- Eyelets Required?: No
- Wheel size: 24", 26", 650b, 29" and 700c
- Fender width: 85mm wide x 460mm long
- Max tire width: 2.25"
- Weight: 174 grams

$5.99
Compatible with:
- Hardcore bike fenders - 700c x 45mm
- Full bike fenders - 700c x 45mm
- SpeedEZ bike fenders - 700c x 45mm
- Hardcore Recumbent bike fender - 700c rear
- Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

$59.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$44.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$44.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.

$44.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.

$20.99
$21.99
5% Off
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use.
- Length: 445mm (7.5")
- Weight: 160g (5.6oz)

$13.99 - $14.99
- Attaches to saddle rails
- Quick and easy to install and remove
- Fat Butt, a wider version for fatbike applications
- Road/CX narrower for road and cross bike applications

$13.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes

$18.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes
- Fat Face: you guessed it, extra wide for Fatbike applications

$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.

$43.99
These steel fenders offer tire coverage that is durable with a timeless aesthetic.
- The crescent full-coverage design offers a closer fit around the tire
- Made in the USA

$16.95
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 35cm / 13.8" (in length)
- Weight: 68g / 2.40oz

$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31cm / 12.2" (in length)
- Weight: 47g / 1.66oz (FS, on fork)

$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31.7cm / 12.5" (in length)
- Weight: 42g / 1.48oz

$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 57.5cm / 22.6" (in length)
- Weight: 75g / 2.65

$15.95
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide.
- QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube
- Two tone injected high impact resistant plastic
- Weight: 233 grams
- Rear angle adjustable
- 73x21x11cm/28.7x8.3x4.3-inch
Page 1 of 4
Next page