Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

Alligator VB-600 Cartridge Pads & Inserts
$4.58 - $13.26
- 72mm long forged aluminum holder with hardware to fit most linear brakes - Replacement inserts include retention pins, fit most 72mm aluminum holders
Alligator VB-610 Pads
$6.84
- 72mm long molded brake blocks with hardware to fit most linear brakes
Avid Disc Bracket Mounting Bolts (Stainless)
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
Avid 20R Brake Pads
$8.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
Avid Rim Wrangler 2 Brake Pad Inserts
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
Avid CPS Hardware Kit (Stainless Steel)
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
Avid Disc Brake Pads (Juicy/BB7/BB5)
$17.99 - $25.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Rim Wrangler 2 Brake Pads (w/cartridge)
$18.00
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
Avid Shorty Brake Pad Inserts
$18.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid Disc Brake Pads (Code)
$24.99 - $34.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Disc Brake Pads (Elixir)
$24.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Front 170mm Post Bracket Hardware Kit
$25.00
Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.
Avid Shorty Brake Pads (w/cartridge)
$25.99
Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid Speed Dial 7 Brake Levers
$29.99
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
Avid Shorty Ultimate Brake Pads (w/cartridge)
$33.00
Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid MatchMaker X (Single)
$34.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
Avid BB5 Road Cable Disc Brake Caliper
$34.99
Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g
Avid G2 CleanSweep Rotor
$40.00 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
Avid Standard Hardware Kit (Titanium)
$44.00
For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$58.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Avid BB7 MTN Cable Disc Brake Caliper
$60.99
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
Avid Shorty Ultimate Rim Brake
$117.00
For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.
Bontrager Rubber Brake Cable Boot
$0.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Bontrager Carbon Stop Cork Brake Pads
$36.99
The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim
Campagnolo Adjusting Barrel and Nut
$39.90
- Campagnolo Adjusting Barrel with Nut Caliper Brake Part - Round adjuster is compatible with: Chorus, Athena, Centaur, Veloce - 4-Lobe Adjuster is compatible with: Super Record, Record
Cane Creek Non-Aero Brake Lever Hoods
$10.82
• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown
Cane Creek SCR5 Brake Lever Hoods
$11.00
• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum
Cane Creek Cross Top Brake Levers
$34.99 - $37.99
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.
Cane Creek 200TT Brake Levers
$39.00
Cane Creek's 200TT Brake Levers are perfect for bullhorn-style bars and other TT base bars. Aluminum levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!
Cane Creek Ergo Stoker Levers
$43.00
Install Cane Creek's Ergo Stoker Levers on your stoker bars and give your co-pilot a comfortable place for their hands. The ergonomic design ensures long haul comfort.
Cane Creek 200TT Carbon Brake Levers
$86.00
Cane Creek's 200TT Carbon Brake Levers are perfect for bullhorn-style bars and other TT base bars. Medium length and aerodynamic carbon levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!
FSA K-Force WE Disc Rotor
$82.00
- Two-piece rotor design with forged aluminum carrier - Double disc ground stainless steel rub ring - Countersunk rivets and disc screw mount points - Rounded edge shape - Mount Type: 6-Bolt
Giant Molded BMX Caliper Brake Pads-Threaded
$5.00
-Molded threaded BMX caliper brake pads
Giant Molded U-Brake Pads-Threaded
$5.00
-Molded threaded u-brake pads
Giant Single Compound Cartridge Road Brake Pad Inserts
$6.00
-Single compound cartridge road brake pad inserts
Giant 3XC Triple Compound Cartridge Road Brake Pad Inserts
$7.00
-3XC triple compound cartridge road brake pads
Giant 3XC Triple Compound Cartridge V-Brake Pad Inserts
$7.00
-3XC triple compound cartridge v-brake pad inserts
Giant Molded Canti Brake Pads
$8.00
-Molded cantilever brake pads
Giant Molded Performance Canti Brake Pads
$8.00
-Molded performance cantilever brake pads
Giant Molded Road Brake Pads
$8.00
-Molded road brake pads
Giant Molded V-Brake Pads
$8.00
-Molded v-brake pads
Giant Sport Disc Pads
$10.00 - $12.00
• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions
Giant Single Compound Cartridge Road Brake Pads
$14.00
-Single compound cartridge road brake pads
Giant Single Compound Cartridge V-Brake Pads
$14.00
-Single compound cartridge v-brake pads
Giant Groove Disc Pads
$15.00 - $17.50
• Grooved heat-dissipating back plate design • Durable organic pad compound • Quiet and powerful braking performance for all weather conditions
Giant 3XC Triple Compound Cartridge Road Brake Pads
$18.00
-3XC triple compound cartridge road brake pads
Giant 3XC Triple Compound Cartridge V-Brake Pads
$18.00
-3XC triple compound cartridge v-brake pads
Giant Conduct Disc Brake Pads
$18.00
- Organic brake compound. - Steel backing plate. - Fits Giant Conduct and Conduct SL disc brakes.
Giant Conduct Disc Brake Rotor
$18.00 - $19.00
Conduct Hydraulic Disc Brake rotor for use with Giant's Conduct Hydraulic Disc Brakes Upgrade Kit - the perfect way to improve the stopping power of your mechanical disc brake-equipped road bike - deLivering you the benefits of hydraulic discs; improved braking power and a sealed lower maintenance system, with minimal hassle and cost. - 6 bolt fitting - Fits Giant Conduct and Conduct SL disc brakes
Giant PSLR-0 Wheelsystem Carbon Brake Pad Inserts
$24.00
-PSLR-O wheelsystem carbon brake pad inserts
Giant Auxiliary Brake Levers
$35.00
Mount Giant's Auxiliary Brake Levers to your road bike's drop handlebar and gain a secondary braking position on the top of your bars. Great for bike tourists, commuters, and any rider who want braking control while sitting up on their bike.
Hayes Banjo Bolt
$2.88
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes Bleed Kit Adapter
$2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Hayes G1/G2 Piston Kit
$8.72
Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal
Hayes Caliper Mounting Bolts
$9.00
Caliper Mounting Bolts for Hayes hydraulic disc brake systems.
Hayes Disc Pad Retention Pin/Clip
$9.00
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
Hayes Caliper Rebuild Parts
$10.60 - $26.25
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
Hayes HB Stroker Ryde/Trail/Carbon Bleed Port Plug
$11.51
Externally fitting service parts for Hayes hydraulic disc brake master cylinder
Hayes Master Cylinder Bleed Plug
$11.81
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
Hayes Stroker Ryde Brake Lever Pivot Pin Kit
$12.60
Replacement levers pivots pin kit for Hayes hydraulic disc levers
Page 1 of 5 Next page
-->