Tools & Tuning

Special extra soft polishing brush specifically designed for use with High Performance Liquid Waxes

Klister for icy snow. Blue Klister for snow temperatures -7C – 30C (19F – -22F)

Liquid paraffin wax to meet the high demands of junior racing and for training sessions in all disciplines. No shipping to Alaska (please buy locally). - Yellow for warm conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f) - A good practice is to “aim cold” with these waxes. Blue is an excellent overall wax.

Very hard HydroCarbon powder wax to use as an additive in cold/ aggressive snow conditions. - With X-Cold Powder/ each wax becomes harder and more friction resistant - Powder form for easy ironing - For extremely cold/ dry snow conditions - Biodegradable

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. For very wet conditions when the snow has turned transformed. Ideal for spring skiing when the dirt content typically is high, as HS10L collect less pollution from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms. Replaces the CH10XL. - +2°C to +10°C (36°F to 50°F).

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS6L is especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. - HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. - Replaces the CH6XL. - -4°C to -12°C (25°F to 10°F).

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS7L performs at its best when typical winter conditions below the freezing point. - Can handle various snow conditions and is not humidity sensitive. - A safe choice that rarely underperforms within its core area of use. - Replaces the CH7XL. - -2°C to -8°C (28°F to 18°F).

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS8L is an extremely versatile wax on both sides of the freezing point with exceptional feedback from racing. It performs in older snow below freezing, new falling snow above freezing and everything between. Basically a must have in conditions you will meet often. - Replaces the CH8XL. - -4°C to +4°C (25°F to 39°F).

Replacement sandpaper for synthetic combi cork (T0011) #120. 3 pcs.

Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.

Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt/ for application of Cera F.

Super practical combi-cork! Synthetic cork with sandpaper for sanding and wax corking. Synthetic Cork with #100 grit sandpaper attached with Velcro. A combi cork with sandpaper to be used on the kick zone before applying kick wax; Will make the kick wax adhere better to the base.

Synthetic cork for kick wax. This synthetic cork has a higher density than a regular synthetic cork. For racing.

Fine sandpaper. 5 sandpapers per pack. Silicon carbide abrasive particles best suited for bases and edges. Used for rubbing the grip zone on cross-country skis. Can also be used to polish the plastic sidewalls of alpine skis. - Sandpaper - For rubbing the grip zone - For cross-country skiers - Cost-effective 5-pack

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220. - Base Preparation

File guide clamp with spring. For attaching a file to the file guide. Suitable for all Swix filing tools. Robust design. - File clamp - For all Swix filing tools - For alpine skiers and snowboarders - Robust design.

Efficient and fast solution during snowboarding competitions. 13.2 cm x 4.3 cm x 3.2 cm

Attach the Fibertex to an oval or rectangular brush. Move the brush back and forth on the surface of the base. When the gray lining is gone, you’re done. For removing microhairs we recommend approx. 50 brush strokes back and forth. - Pack of three sandpapers 110 x 150 mm - Aluminum oxide abrasive particles

Supreme in extreme cold conditions! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow -12°C to -25°C (10°F to -12°F). - Old fine-grained snow -15°C to -30°C (5°F to -22°F). As the name indicates, this is hardwax made for the coldest conditions. Frequently used in the polar regions of Europe and North America. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Great kick just below zero! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow 0°C to -3°C (32°F to 27°F). - Old fine-grained snow -2°C to -6°C (28°F to 21°F). A very frequently used wax, both in racing and touring. When Blue Extra becomes somewhat slippery, a thin layer of Violet Special probably is the right wax. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Fluor Free Hydrocarbon wax -8°C to -14°C. Good race wax in very cold conditions. Good in dry conditions. - Durable wax for cold conditions - Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Allround, fluoro free kickwax for normal winter conditions. Fluoro free, purple-blue kick wax for normal winter conditions well below the freezing point. - Fluoro free kickwax. - A winner in the winter trails. - For racing - For new and new fallen fine-grained snow from -1°C to -5°C (30°F to 23°F). - Old/partly transformed snow from -3°C to -8°C (27°F to 18°F). Purple-blue kick wax is designed for normal winter conditions well below the freezing point. An obvious “next step” if VP40 does not provide a safe kick. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

Great in challenging conditions! Universal silver klister for recreational and racing skiers. Gives a great kick. Temperature range +3°C to -5°C (38°F to 23°F). A very flexible klister, working on both sides of freezing when conditions are changing between coarse and transformed moist to wet fine-grained snow. Scraper included.