Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Tools & Tuning

Toko Polishing Brush Liquid Paraffin
Special extra soft polishing brush specifically designed for use with High Performance Liquid Waxes
Swix Spare Sandpaper for T11
$3.99
Replacement sandpaper for synthetic combi cork (T0011) #120. 3 pcs.
Swix T87 Groove and all purpose scraper
$3.99
Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.
Swix T35 Scraper for wax and klister
$5.99
Practical scraper for removal of wax and klister. Handy format. For all skiers.
Swix T21 Natural Cork w/Felt
$6.99
Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt/ for application of Cera F.
Toko Groove Pin Nordic
$6.99
For clean removal of wax residue from ski grooves.
Toko Plexi Blade 3mm
$6.99
Plexi Blade for removing excess wax.
Swix T11 Synthetic cork w/sandpaper
$7.99
Super practical combi-cork! Synthetic cork with sandpaper for sanding and wax corking. Synthetic Cork with #100 grit sandpaper attached with Velcro. A combi cork with sandpaper to be used on the kick zone before applying kick wax; Will make the kick wax adhere better to the base.
Swix T12 Synthetic racing cork w/HD
$7.99
Synthetic cork for kick wax. This synthetic cork has a higher density than a regular synthetic cork. For racing.
Toko Plexi Blade 5mm GS
$8.99
Plexi blade for removing excess wax. The short side is tapered at a 45° angle (only for product 5541919) to allow easy removal of klister and grip wax. Stiff.
Swix Steel Scraper
$9.99
Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.
Swix T267M Fibertex Combi
$10.99
Practical combi pack with Fibertex. Fibertex Combi Pack with Fine (T266)/ Medium (T264) and Coarse (T266N) for ski base care.
Toko Edge Grinding Rubber
$10.99
Grinding block for removing burrs and corrosion from ski and snowboard edges.
Swix V05 Polar Hardwax
$11.99
Supreme in extreme cold conditions! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow -12°C to -25°C (10°F to -12°F). - Old fine-grained snow -15°C to -30°C (5°F to -22°F). As the name indicates, this is hardwax made for the coldest conditions. Frequently used in the polar regions of Europe and North America. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.
Swix V45 Violet Special Hardwax
$11.99
Great kick just below zero! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow 0°C to -3°C (32°F to 27°F). - Old fine-grained snow -2°C to -6°C (28°F to 21°F). A very frequently used wax, both in racing and touring. When Blue Extra becomes somewhat slippery, a thin layer of Violet Special probably is the right wax. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.
Swix CH10X Yellow
$12.99
Fluor Free Hydrocarbon wax 0°C to +10°C. Soft wax for wet snow. Good for first base prep of new skis. - A versatile wax for warm conditions - Ideal for base prep and training use Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). CH10X is made slightly harder than the old CH10. Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes CH10X more durable than before. A good wax for base prep and training. For racing, we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix CH4X Green
$12.99
Fluor Free Hydrocarbon wax -12°C to -32°C. Good race wax in extreme cold snow. High durability on aggressive snow. Good in dry conditions. - Perfect when extremely cold and dry friction conditions - Very durable - Great on man-made snow Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp.: 155°C (311°F). A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.
Swix CH5X Turquoise
$12.99 - $36.99
Fluor Free Hydrocarbon wax -8°C to -14°C. Good race wax in very cold conditions. Good in dry conditions. - Durable wax for cold conditions - Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.
Swix CH6X Blue
$12.99
Fluor Free Hydrocarbon wax -5°C to -10°C. Good training wax in cold condition. Easy to warm in. Good in dry conditions. - An undisputed favorite in cold conditions - Hard and durable, yet easy to apply - A favorite both in alpine and XC Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp.: 145°C (293°F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
Swix PS10 Yellow
$14.99
PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply
Swix PS5 Turquoise
$14.99
The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).
Swix PS6 Blue
$14.99
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).
Swix PS7 Violet
$14.99
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).
Swix PS8 Red
$14.99 - $39.99
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).
Swix T166B Combi Brush
$15.99
The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality. - For training and competitions - Fluorine free and 100% biodegradable - Thoroughly tested on several types of conditions
Toko All in One Universal Hot Wax
$15.99
Universally applicable ecological hot wax for amateur enthusiasts. - For all snow conditions and temperatures - Good sliding properties - Prevents the base from drying out - Biodegradable - Protects skis from dirt and oxidation when they are stored - Resealable wax case
Toko Nordic Klister 55g Blue
$15.99
Klister for icy snow. Blue Klister for snow temperatures -7C – 30C (19F – -22F)
Swix Glide Wax Cleaner
$19.95 - $29.95
Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
Swix N16-150 Swix Skin Cleaner 150ml
$19.99
Fluor Free Efficient cleaner for integrated skins. - Cleaner for integrated skins - To be used after skiing - For skin ski owners SWIX Skin Cleaner in a large container. Cleans integrated skins in a gentle way without affecting the skin glue. Restores the properties of the skin and increases its efficiency. To be used after skiing. Pumpspray. Does not include Fiberlene.
Swix VG30 Blue Base Grinder
$19.99
Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.
Page 1 of 3 Next page