Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Shimano 9-Speed Chain Pins
$9.00
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
Shimano Di2 E-Tube Wire
$26.99 - $38.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Salsa Frame Plugs
$4.99
Frame Plugs for Internal Cable Routing
SRAM Flat Mount Disc Brake Adaptor
$17.99
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
SRAM IS Disc Brake Adaptor
$19.99
Disc Brake Adaptors - Includes Stainless Bolts
SRAM Power Link Chain Connector
$5.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$5.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Chain Connector 12-speed
$5.99
- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4
SRAM StealthamaJig Hydraulic Disc Brake Hose Fitting
$8.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
SRAM Stealthamajig Hydraulic Disc Brake Hose Fitting Kit
$7.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
SRAM X-Sync Pulley Assembly
$49.99
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
SRAM XX1/X01/GX Eagle Rear Derailleur Ceramic Bearing Pulleys
$74.99
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
SRAM eTap BlipClamp
$19.99
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
RockShox 2010-2012 Reverb Full Service Kit (includes new, upgraded IFP), A1
$69.99
Contains all the parts needed for scheduled maintenance and/or rebuild of Reverb and Reverb Stealth Seatposts. - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Requires RockShox Specialty Tools to perform service: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys and Bushing - Updated service kit as of 06/2016
RockShox Maxle Lite Through-Axle
$49.99 - $69.99
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
RockShox Maxle Stealth Front Thru-Axle
$26.00 - $49.99
The Maxle Stealth offers a light, low profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
RockShox Reverb Basic Service Kit (O-rings Only)
$17.99
RockShox Reverb Service Kit Includes O-Rings only
RockShox Reverb Hydraulic Hose Kit
$27.67 - $27.99
RockShox Reverb Hydraulic Hose Kit for replacing the hyraulic line on your Reverb dropper seatpost. - Fits all generations of Reverb - Includes new hose, new strain relief, new barb
RockShox Reverb Hydraulic Hose Kit w/ Connectamajig
$27.99
This is a Connectamajig hose kit for replacing your Reverb's hydraulic line. - Fits all generations of Reverb Stealth - Includes Connectamajig, new hose, new strain relief, new barb - 2000mm hose
Race Face Aeffect Dropper 1x Lever
$39.99
- Ergonomic 1x lever - Compatible with the Turbine and Aeffect Dropper Posts - Standard shifter cable and housing
Problem Solvers 1-1/8-inch Headset Spacers
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Problem Solvers Braze-On Front Derailleur Adapter
$19.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
Problem Solvers Cantilever Stud
$6.99
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Problem Solvers Compression Plug for 1 1/8-inch Forks
$17.99
The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.
Problem Solvers Double Chainring Bolts - 8mm
$9.99 - $19.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Problem Solvers Double Chainring Bolts Dual Hex Head - 10mm
$24.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
Problem Solvers Double Chainring Bolts Dual Hex Head - 8mm
$19.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
Problem Solvers Handlebar Clamp Shim
$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Problem Solvers Inner Chainring Bolts - 8mm
$13.99
The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 8mm long and made of light, durable aluminum.
-->