Burton

With a stylish look that goes well with any jacket and a laundry list of kid-friendly features, plus upgraded waterproofing, the bestselling girls' Burton Sweetart Pant is your ticket to the top. Low-profile Thermacore insulation is both comfortable and light, trapping heat without unnecessary bulk. Hidden beneath the clean exterior you'll find all sorts of must-haves for the mountain like a quick-drying taffeta lining, adjustable waistband, cuff-saving leg lifts, and Room-to-Grow extendable legs to get from one season (or sibling) to the next. - Regular fit is just right: Not too tight or too baggy; Articulated knees - DRYRIDE two-layer fabric [10,000mm/5,000g] is highly breathable, waterproof, and quick drying; PFC-free DWR coating - Fully-taped seams create the ultimate seal against foul weather - ThermacoreECO insulation [60g] is lightweight and breathable, providing a super-comfortable feel and low-bulk warmth that cranks the heat and dries quickly. It's bluesign® approved and features over 90% recycled fibers that provide long lasting durability and all-around easy care. - Room-to-Grow system extends the length of the legs by 1.5in to keep up with growth spurts - Anti-scuff cuffs with hook-and-loop cuff elevators; Water-resistant boot gaiter - External hook-and-loop waistband adjustment; Belt-loop ticket O-ring

Light and warm with a forgiving flex that lets you do it all, the popular Mint is now available with traditional lacing for the purist. Soft and forgiving, the women's Burton Mint Lace Snowboard Boots check all the boxes to keep you focused on your next run. From reflective tech that helps retain body heat for extra warmth, to a broken-in feel right out of the box, the Mint makes comfort a priority. Add traditional lacing to the Mint's proven soft flex, comfy fit, and relaxed ride for a boot that feels as good at the end of a full day as it did at the start. Lacing Traditional lacing system provides a tried and true method for a snug and customized fit. Flex / Response Durable polyurethane backstay, 1:1 soft flex tongue creates a snug fit between boot and tongue, eliminating the need to readjust while you ride. Comfort Snow-proof internal gusset completely seals the lower zone of the boot, keeping your feet warm and dry. Liner Imprint 1 heat-moldable liner with integrated lacing and lightweight power panels lets you tighten down the liner. Cushioning Sleeping bag reflective foil underfoot reflects heat back to the foot, improving both warmth and comfort in cold conditions. Outsole Shrinkage footbed reduction technology reduces the boot's overall footprint, minimizing toe drag, DynoLITE outsole offers superior cushioning, improved board feel, and consistent support in a 20% lighter weight construction that can withstand repeated impacts.

Light and warm with a forgiving flex that lets you do it all, the popular Mint is now available with traditional lacing for the purist. Soft and forgiving, the women's Burton Mint Lace Snowboard Boot checks all the boxes to keep you focused on your next run. From liners that reflect body heat for extra warmth, to a broken-in feel right out of the box, it makes comfort its priority. Add traditional lacing to the Mint's proven fit and ride, and you have a boot for exploring the whole mountain. - Lacing: Traditional lacing system provides a tried and true method for a snug and customized fit - Flex/Response: Durable polyurethane backstay, 1:1 soft flex tongue creates a snug fit between boot and tongue, eliminating the need to readjust while you ride - Comfort: Snow-proof internal gusset completely seals the lower zone of the boot, keeping your feet warm and dry - Liner: Imprint 1 liner with integrated lacing and lightweight power panels lets you tighten down the liner - Outsole: Shrinkage footbed reduction technology reduces the boot's overall footprint, minimizing toe drag, DynoLITE outsole offers superior cushioning, improved board feel, and consistent support in a 20% lighter weight construction that can withstand repeated impacts - Burton Warranty: 1-Year Warranty

Full cushioning and learning-friendly flex let you climb the progression ladder to new heights. The women's Burton Citizen Re:Flex Snowboard Bindings blend performance and comfort that riders of all abilities can appreciate. Its lightweight design includes FullBED cushioning to absorb shock, reduce fatigue, and keep you riding longer. Easy-entry straps make buckling up a breeze, and consistent flex makes for a responsive feel that lets you push your riding. Re:Flex baseplates are universally compatible with all major mounting systems. Ankle Strap Reactstrap ankle strap has a minimized construction that is ultra responsive, conforming to any boot. Toe Strap Supergrip Capstrap toe strap wraps over the toebox of the boot and is fully injected to reduce waste. Cushioning Re:Flex FullBED cushioning system provides full underfoot cushioning, maximizing comfort while minimizing fatigue, and features a trap-door design for easy-access to mounting hardware. Baseplate Single-component baseplate construction features one material throughout, providing consistent response and feel while riding on any terrain. Lightweight, bombproof polycarbonate baseplate construction is buttery and playful for laid-back, relaxed cruising. Mounting System Re:Flex mounting system dramatically improves board flex and feel while also reducing weight. Universally compatible with all current snowboard mounting systems. Hi-Back Single-component canted hi-back construction provides immediate response and allows you to manipulate the overall flex profile of the board. Forward Lean MicroFLAD system uses a lever and sliding plate system to set the forward lean angle of the hi-back. Buckles Smooth Glide buckles are easy to secure and feature aluminum levers and a steel base for durability.

Snap-up shirt class and fleece versatility to keep you looking good and ready for anything. Is it a fleece? Is it a button-up? Yes, yes it is. Snap the closures on the women's Burton Hearth Snap-Up Fleece Shirt closed and get extra warm, or leave it open for a little layered style. It's classy, it's lounge-wear, it's pretty much up for whatever you're up for. Stash your device in the inside media pocket and head out for the day. Product Features: - Regular fit is just right: Not too tight or too baggy; Stretch fabrication - 100% polyester polar fleece for maximum warmth and breathability - Center-front reinforced placket with snap closure - Stretch back neck tape for reinforcement - Drop hem for extended length and added coverage - Interior media port inside chest pocket - Snap closure microfleece hand-warmer pockets; Zippered chest pocket - bluesign approved materials use only safe chemicals and reduce impact on both humans and the planet during manufacturing; Visit burton.elasticsuite.com to see more details on all of our bluesign products

A warm fleece with retro style – just what your wardrobe needs for the cold months ahead. Warmth comes in many fuzzy forms and one of them is the men's Burton Hearth Fleece Pullover. Classic style and polar fleece add breathable warmth to this easy-to-wear pullover. Zippered hand-warmer pockets and elastane binding at the cuffs, hem, and collar ramp up the cozy factor.

• Regular fit is just right: Not too tight or too baggy
• Polar fleece build provides lightweight warmth that repels moisture for quick-drying performance and versatility
• Reinforced placket with snap closure at center front
• Media port inside of pocket
• Stretch binding at cuffs, hem, and collar
• Zippered hand-warmer pockets
• bluesign® approved materials are responsibly crafted in processes that minimize impact on people and our planet

A trusty technical GORE-TEX glove with removable liner provides two-in-one versatility and warmth all winter long. The life of a glove is not easy. More than any other part of your riding kit, gloves have the most contact with the elements. DRYRIDE 2L fabric, and a GUARANTEED TO KEEP YOU DRY® GORE-TEX membrane protect this Thermacore-insulated glove from downright rugged winter conditions. Screen Grab® synthetic leather gives you stealth touchscreen control with any finger. A removable four-way stretch fleece liner dries quickly and gives you options for any weather. Wear just the liner for mild weather laps, just the shell in sloppy spring conditions, or combine the two for total midwinter riding warmth and comfort.

Reward yourself with the soft and warm comfort of the Burton Oak Pullover Hoodie. Being cozy is a right, not a privilege.

Keep your board safe and within easy reach with these simple storage and display mounts. Display or stow your ride on the shop, condo, or garage wall with board-specific mounts. These easy-to-install mounts attach to any flat surface with the included hardware and accommodate snowboards of any shape or size. It's way better than simply cramming your board into the nearest corner or learning how to weld up your own custom rack. - Three-point mounting system fits any snowboard - Can be mounted on to any flat surface - Mounting hardware and instructions included

Ratch-a-tat-tat. Speed and safety make this five-in-one ratcheting tool the choice of pros and ams alike. The low-profile shape prevents impactful landings when pocketed, while a foldout handle provides maximum cranking power for tightening sCrewnecks. It's glove-friendly and stocked with two-ended Phillips and flathead/Allen bits, as well as a mini binding wrench, all securely stowed inside the tool when not in use. - Lightweight and compact for easy carrying -Foldout handle for maximum ratchet power -Able to operate with gloves on -Includes: #2 and #3 Phillips head, flat head, 4mm Allen key, and 10mm wrench

Ratch-a-tat-tat. Speed and safety make this five-in-one ratcheting tool the choice of pros and ams alike. The low-profile shape prevents impactful landings when pocketed, while a foldout handle provides maximum cranking power for tightening screws. It's glove-friendly and stocked with two-ended Phillips and flathead/Allen bits, as well as a mini binding wrench, all securely stowed inside the tool when not in use. - Lightweight and compact for easy carrying - Foldout handle for maximum ratchet power - Able to operate with gloves on - Includes: #2 and #3 Phillips head, flat head, 4mm Allen key, and 10mm wrench

A textured knit and soft lamb's wool blend step up the warmth factor for cold winter days. When the day calls for a warm hat, the comfy wool-blend of the Burton Seed Stitch Beanie is always there for ya. -Low-profile fit -80% lamb's wool, 20% nylon -Embroidered patch -Unisex sizing

Adjust your bindings or your straps in a cinch with the snowboard-friendly, palm-size Burton Bullet Tool. This lightweight tool is your best friend when you're in need of a quick tune up on the slopes. You can even build a grill with it.

Keep it classic with these traditional toe straps. For old school rippers and purists alike, there's no substitute for the downward force of a traditional over-the-top toe strap. So get a set of Burton OTT Toe Straps and take your bindings back in time. Compatible with just about any Burton binding out there, except the kids' Grom. All you need to do is switch over the buckles, tongues, and sliders from your other straps, or upgrade with a new set. - Compatible with all Burton bindings excluding Grom - Compatible with Smooth Glide or Double Take buckles - Tongue, slider, and buckles not included

Treat yourself to a little extra softness. There's comfy and then there's the Burton Plush Beanie. Its recycled poly blend has a cozy feel that's sure to brighten a cold winter day. -Mid-profile fit -70% recycled polyester, 30% polyester -Fold-up cuff -Embroidered patch -Unisex sizing

A jacquard knit gives this soft, slouchy style a little extra flair. Fold up the cuff for a traditional fit or pull it down low for a slouchy feel. Either way, the Burton Recycled Walden Beanie adds warmth to a cold day with 100% recycled poly knit. -High-profile fit -100% recycled polyester fabric -Fold-up cuff -Pom on top

Slouch fit can be pulled down over the ears - Soft, textured chenille and acrylic yarn blend - Fold-up cuff - One size fits all

Traction control for your back foot. Slamming while unloading is a crash-and-burn that earns absolutely no style points. Prevent the one-foot slip and slide with subtle, steely traction nubs that are made from corrosion-resistant, aircraft-grade aluminum. Made simple with a peel-and-stick application. - Featuring corrosion-resistant, aircraft aluminum studs - Come six to a pack

Stay on board with extra-grippy stomp pads, featuring sustainably sourced Bloom Foam made from algae biomass. Everyone needs to get a grip, and the Burton Foam Stomp Pad is a great place to start. Each foam pad delivers traction wherever you want it. Like a sticker, simply peel and place where you need grip the most. Foam mats are generally placed to help with getting on and off lifts, but are also great for one footers – if you're into that sort of thing. - Provides outstanding traction and grip

Stay on board with extra-grippy stomp pads, featuring sustainably sourced Bloom Foam made from algae biomass. Everyone needs to get a grip, and the Burton Foam Stomp Pad is a great place to start. Each foam pad delivers traction wherever you want it. Like a sticker, simply peel and place where you need grip the most. Foam mats are generally placed to help with getting on and off lifts, but are also great for one footers – if you're into that sort of thing. - Provides outstanding traction and grip

Exaggerated slouch fit can be pulled down over the ears - 100% Acrylic - Stylish purl knit - One size fits all

Focused traction. For riders who need a little back-foot traction, but don't want to take up too much topsheet real estate, our mini scraper mats are the way to roll. A small scraper ridge helps remove snow and ice build-up on boot soles before strapping in. - Features two 2-inch disks - Provides back foot traction

The Burton Recycled All Day Long Beanie does it right with a cozy, sustainable approach using recycled poly yarns.

A traction two-for-one. Everybody likes a good two-for-one, like taco night or happy hour. This two-piece stomp mat allows for customizable placement in line with your normal range of back foot positions for one-footing or unloading the chair. Dimensional four-point stars add grip when snow or ice cakes up. - Two-piece stomp mat for custom placement - Four-point stars provide additional grip

Fresh parts for Double Take buckle systems. Don't let worn out gear wreck your day. Upgrade, repair, or stock your emergency kit for the unexpected with the Burton Double Take Ankle Tongue Slider. These essential parts will replace ankle, tongue, and slider straps on any Burton binding that uses the Double Take buckle system. - Used to replace ankle, tongue, and slider straps on Burton bindings featuring the Double Take buckle system

Upgrade your old buckles with a set of freshies, or keep a spare pair handy in case of emergency. Although not as impossible as riding without an ankle buckle, riding with a missing or broken toe buckle is less than ideal. Fix the problem or prepare in advance by packing a spare set. Compatible with Burton bindings featuring Smooth Glide buckles. - Compatible with all men's and women's Burton bindings with Smooth Glide buckles - Includes one pair of Smooth Glide buckles with mounting screws

Upgrade your ratchet tongues and sliders with a set of freshies, or keep a spare pair handy in case of emergency. Don't let a binding buckle issue end your day. Be prepared with spare binding parts and bounce back quickly with our toe tongue and slider replacement kit. Strap not included. - Compatible with all men's and women's Burton bindings with Smooth Glide buckles

Super slouch fit can be pulled down over the ears - Fold-up cuff - Lightweight acrylic - One size fits all

For riders who need a little back-foot traction, but don't want to take up too much topsheet real estate, our mini scraper mats are the way to roll. A small scraper ridge helps remove snow and ice build-up on boot soles before strapping in.

Slouch fit can be pulled down over the ears - 100% acrylic seamless knit - Woven clip label - One size fits all