Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

CO2 Inflators

Specialized MTN Tube Spool
$34.99
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Ingenious design allows the spare tube to be rolled up, while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accommodate all different size mountain tubes
Planet Bike 12-Gram CO2 Cartridge 3-Pack (Unthreaded)
$9.99
Planet Bike's 12-Gram CO2 Cartridge 3-Packs are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Airship and most other manufacturers' inflators that use unthreaded cartridges.
Planet Bike Air Kiss CO2 Inflator
$14.99
Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.
MSW XLA-40 Air Cartridge
$12.99
This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading
Genuine Innovations 16 Gram Threaded CO2 Cartridges (20-pack)
$3.99
16 grams of Genuine Innovations' most popular size CO2 cartridge. Perfect for road tires and standard bike tires. These threaded CO2 cartridges are compatible with all Genuine Innovations inflators. - 20-pack
Genuine Innovations 16-Gram Non-Threaded CO2 Cartridges (2-pack)
$9.99
These 16-gram cartridges can be used with Genuine Innovations' Second Wind MTB, Ultraflate and Proflate models as well as other cupped inflators.
Genuine Innovations 16-Gram Threaded CO2 Cartridges (2-pack)
$9.99
These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
Genuine Innovations 20-Gram Threaded CO2 Cartridges (2-pack)
$11.99
The Genuine Innovations 20-Gram Threaded CO2 Cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread. The 20-gram size will fully inflate those high-volume mountain bike tires (29er, DH, etc.).
Genuine Innovations Ultraflate
$24.99
Comfortable, durable and most of all reliable, the Ultraflate is Genuine Innovations' most tried and true cupped inflator. Its reinforced glass nylon construction and brass internals means it can take the strain of everyday use and still maintain precision inflation performance. - Trigger-controlled technology for fast, easy and controllable CO2 inflation - Built-in "trigger lock" to prevent accidental discharge - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes (1) Ultraflate inflator head (1) non-threaded 20 gram CO2 cartridge
XLAB Multi-Strike Repair Holder
$27.95
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
XLAB Starter Kit
$93.95
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Vittoria Pit Stop Tire Sealant
$11.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Topeak Airbooster G2 CO2 Inflator
$44.95
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak HybridRocket HP
$59.95
Topeak makes it easy to fill your tires with the HybridRocket HP pump. This innovative little ride-saver is a CO2 inflator on one side and a standard pump on the other. It also boasts aluminum construction for superb durability and max pump power. Its small size easily fits into a jersey pocket and with a capacity of 160 psi you'll have no problem getting rolling again. The HybridRocket's extendable hose with SmartHead fits both Presta and Schrader valves and lets you pump from a more comfortable angle, lessening chances of valve breakage.
Topeak Ninja CO2
$44.95
Ultimate flexibility is a hallmark of the Ninja series, and Ninja CO2 is no exception. Mount it to your bike with most water bottle cages to match the aesthetics that best suit you. The included Micro AirBooster and 2 threaded 16g CO2 cartridges make fixing flats easy with quick access by a simple twist. - Material: Aluminum / Engineering grade plastic - Inflator Head: Presta / Schrader Push to inflate - Inflator Material: CNC aluminum - Compatibility: Non-adjustable water bottle cage - Added Features: 2 threaded 16g CO2 cartridges Compartment for CO2 inflator & cartridges - Size: 16.7 x 9.3 x 5.4 cm / 6.6” x 3.7” x 2.1” - Weight: 191 grams
Topeak Tri-BackUp Elite
$59.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Specialized Air Tool C02 Mini Kit (16-gram)
$28.00
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 16-gram C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized Air Tool C02 Mini Kit (25-gram)
$29.99
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 25g C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized CPRO2 Pump
$25.00
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
Specialized CPRO2 Trigger With Gauge
$45.00
The easiest way to use CO2. - Gauge confirms proper inflation, making it easy to adjust pressure mid-ride. - Thumb trigger gives precise control. - Accommodates threaded 16g and 25g cartridges. - One 16g CO2 cartridge included.
SKS Airbuster CO2 Inflator
$24.99
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
SKS TL-Head Set
$32.99
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
Profile Design CO2 Mounting Bracket
$16.99
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Portland Design Works Barkeep Inflator
$35.00
The BARkeep integrates Portland Design Works' exclusive Tap Handle technology that carefully controls the flow of CO2. Compatible with both Presta and Schrader valves, the BARkeep also integrates a pressure gauge to ensure a perfect pour to fix your flat. A beginner-friendly CO2 inflator! - CO2 inflator with integrated pressure gauge - PDW exclusive Tap Handle technology controls CO2 flow while protecting your hand from frosty cartridges  - Weight: 94g (3.3oz) - Length with Tap Handle: 175mm (6.9") - Length without Tap Handle: 87mm (3.5")
Portland Design Works Fatty Object CO2 Inflator w/Cartridge
$35.00
The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz)  - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty
Portland Design Works Ninja Pump
$35.00
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty
Portland Design Works Shiny Object CO2 Inflator
$19.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 
Portland Design Works Shiny Object CO2 Inflator w/cartridge
$26.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. It includes a control knob to keep you in charge of the pressure and a threaded Co2 cartridge with a neat leather sleeve. And, it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)  - Leather sleeve length: 55 mm (2.25") - Weight of inflator with cartridge: 80 g (3 oz)
Portland Design Works Tiny Object
$22.00
Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs. - Presta valve compatible - Control knob easily regulates CO2 flow - Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes - Lifetime PDWarranty
Planet Bike 16-Gram CO2 Cartridge - Threaded
$9.99
Planet Bike's 16-gram CO2 Cartridges are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Air Kiss, Red Zeppelin, Airship, and other manufacturers' inflators that use threaded cartridges.
Page 1 of 3 Next page